JVC KW-R925BTS Instruction Manual - Page 37
Wiring connection, IMPORTANT
View all JVC KW-R925BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Wiring connection Output terminals ( 32) Signal cord (not supplied) JVC Amplifier*1 Vehicle dashboard Factory wiring harness (vehicle) Custom wiring harness (separately purchased) To the steering wheel remote control adapter Antenna terminal Light blue/yellow STEERING WHEEL REMOTE Join the same color wires together. Blue: To power antenna Blue/white: To amplifier Blue/white: Remote (200 mA max.) Orange/white: Illumination Fuse (10 A) Brown (Not used) *1 Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the unit. *2 You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, 22. Recommended connection Yellow: Battery 12 V Red: Ignition 12 V Black: Ground Gray: Front speaker/For 3-way crossover: Mid range speaker (right) Gray/black White: Front speaker/For 3-way crossover: Mid range speaker (left) White/black Purple: Rear speaker/For 3-way crossover: Tweeter (right) Purple/black Green: Rear speaker*2/For 3-way crossover: Tweeter (left) Green/black *2 (For KW-R925BTS) USB cable (DC 5 V 1.5 A) (approx. 1.2 m/4 feet) MIC (Microphone input terminal) ( 14) Expansion port (12 V 500 mA) To the optional SiriusXM Vehicle Tuner (commercially available) ( 11) Remote wire (not supplied) Ignition switch Car fuse block Separate red wire Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. ENGLISH 33