JVC KW-R930BTS Instruction Manual America - Page 43
Wiring connection - steering wheel controls
View all JVC KW-R930BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
INSTALLATION/CONNECTION Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Vehicle dashboard Factory wiring harness (vehicle) Custom wiring harness (separately purchased) Blue: To power antenna Blue/white: To amplifier Brown (not used) Recommended connection Antenna terminal To the steering wheel remote control adapter Light blue/yellow Join the same color wires together. Blue/white: Remote (12 V 350 mA) Orange/white: Illumination Yellow: Battery 12 V Red: Ignition 12 V Black: Ground Gray: Front speaker/3-way crossover: Mid range speaker (right) Gray/black White: Front speaker/3-way crossover: Mid range speaker (left) White/black Purple: Rear speaker/3-way crossover: Tweeter (right) Purple/black Green: Rear speaker*1/3-way crossover: Tweeter (left) Green/black *1 Fuse (10 A) Ignition switch Separate red wire Car fuse block Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. *1 You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, 26. ENGLISH 39