JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 29
Shooting a computer monitor screen - ky f 1030
View all JVC KY-F1030U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4. Shooting a computer monitor screen Shooting a PC monitor Horizontal line noise will appear on the screen when attempting to record images on a PC monitor or display. To clear this noise, KY-F1030 shutter speed must be adjusted with scan speed of the monitor. In the digital output mode, the settings should be performed using the special application software [KY-LINK]. 1. Open the side switch panel, and press the [MENU] button. The [MENU (QUICK)] screen appears on the monitor screen. Inside window ʦ.&/6ʧ UP/AW MENU SET DOWN 1 2 34 ʦ61ʧ ʦ4&5ʧ ʦ%08/ʧ 2. Press the [UP] or [DOWN] button to select [SHUTTER], then press [SET] (The set value of [SHUTTER] item will be displayed in purple). 3. Use the [UP] or [DOWN] button to change the set value to "V. SCAN", then press the [SET] button (The set value of [SHUTTER] item will return to white). 4. Next, press the [UP] or [DOWN] button to select [SHUT- TER SPEED], then press the [SET] button. PC monitor Select V.SCAN 5. Press either [UP] or [DOWN] to change the shutter speed. Bar When a black bar can be seen on the screen: decrease the shutter speed by pressing the [DOWN] button. When a white bar can be seen on the screen: increase the shutter speed by pressing the [UP] but- ton. 6. Press the [SET] button when the bar is at its minimum. Data is registered to KY-1030 memory. MEMO Pressing the [MENU] button without pressing the [SET] button will return the unit to its previous settings without confirming the changes. MENU (QUICK) screen 7. Press the [MENU] button to return to the normal screen. MEMO • The vertical scan frequency differs depending on the PC type and the horizontal bar may not be completely cleared away. The frequency may also change depending on the software used. E25