JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 44
SYSTEM SETTING screen
View all JVC KY-F1030U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5. Menu screen settings (continued) SYSTEM SETTING screen [ ] indicates the factory setting Item AE DISPLAY FRZ DISPLAY FRZ CANCEL TEST PATTERN LEVEL When "BAR"/ "IMPULSE" is selected MENU RESET Set Value [OFF] ON [ON] OFF [MANUAL] AUTO (1s) AUTO (3s) AUTO (5s) OFF [BAR] RAMP IMPULSE [0.7V] 0.57V Contents Used to set whether the ALC, EEI and IRIS values are displayed on the analog output screen. OFF: No on-screen-display ON: On-screen-display Used to set whether the "FREEZE" indicator is shown on the screen at the time of trigger input. ON: Displayed OFF: Not displayed Sets the method for canceling the FREEZE when the monitor screen is in FREEZE condition when connection is made through digital output. MANUAL : Cancelled by trigger input. AUTO(1s) : Cancelled after 1 second. AUTO(3s) : Cancelled after 3 seconds. AUTO(5s) : Cancelled after 5 seconds. OFF : Not cancelled. * When set to "AUTO" or "OFF", the displayed screen can be updated by trigger input during the FREEZE condi- tion. Sets the test pattern type output when the function set- ting switch No.1 is set to "ON". BAR : "BAR" pattern is output. RAMP : "RAMP" pattern is output. IMPULSE : "IMPULSE" pattern is output. Sets the level of the color signal bar output from the KY1030's [ANALOG OUT] connector. 0.7V: 0.7V test signal is output 0.57V: 0.57V test signal is output Resets all the set values of menus to the initial values. ੬ page E43, Resetting menu settings E40