JVC KY-F550U Instruction Manual - Page 24
White Balance Adjustment
View all JVC KY-F550U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3. Setting and Adjustment During Shooting (continued) White Balance Adjustment Color of light (color temperature) may vary with light sources. When light source for illumination of object is changed, adjust white balance (AUTO WHITE) again. Do not place strong reflectors such as metals near the object. This may cause error in achieving white balance. [MENU] [5] [SET] 5 / BARS MENU SET ∞/ AW 1 2 34 [∞] Switch 4: [OFF] Item Set Value - - -WHI TE BA LANCE - - - WH I TE BA LANCE AUTO1 LEVEL ( R ) 0 LEVEL ( B ) 0 S H AD I NG PRESET LEVEL ( R ) LEVEL ( G ) LEVEL ( B ) PAGE BACK "WHITE BALANCE" Screen Auto White Operation Area AUTO WH I TE 1 O PERA T I O N Auto White Operation Activated AUTO W H I TE 1 OK (3200K) White balance adjustment includes Auto White, Full-time Auto White (FAW), manual and preset. Ⅵ Setting procedures for Auto White ("AUTO1", "AUTO2") Make sure that the Switch 4 located at the side of this unit is set to [OFF] (lower side). 1. Press the [MENU] button for 1-2 seconds. The "MENU" screen will be displayed. 2. Use the [5/∞] buttons to select "WHITE BALANCE..", then press the [SET] button. The "WHITE BALANCE" screen will be displayed. 3. Use the [5/∞] buttons to select "WHITE BALANCE", then press the [SET] button. The set value displayed will start to blink. 4. Use the [5/∞] buttons to select "AUTO1" or "AUTO2", then press the [SET] button. 5. Press the [MENU] button for 1-2 seconds. The normal screen will be displayed. Note Upon returning to the normal screen, place a white object with the same illumination conditions as the object, zoom in to the white portion at the center of the screen (above 80% within the area). 6. Press the [AW](Auto White) button. ● When auto white is activated, the auto white operation area and "AUTO WHITE1,2 OPERATION" are displayed on the monitor. ● When white balance is achieved, a rough color temperature as well as "AUTO WHITE1,2 OK" will be displayed for about 3 seconds before returning to the normal screen. Auto White Operation Ends 22