JVC LT40X776 Instructions - Page 52

Initial Setup Digital-In The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p picture signal is being displayed on the screen. There are two types of 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2. Press the MENU button π† √® π† To DIGITAL-IN To enter To select AUTO, SIZE1 or SIZE2 INITIAL SETUP PREVIOUS VIDEO-1MONITOR OUT DIGITAL-IN DIGITAL-IN AUDIO OFF SIZE1 DIGITAL Press the MENU button to finish NEXT PAGE SELECT OPERATE (1/5) MENU EXIT Notes: • The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the Digital-In terminal and the picture is being displayed on the screen. • You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the televison will select "SIZE1" or "SIZE2" automatically. Digital-In Audio This feature is used if you have a DTV or HDMI compatible component connected to your TV. Press the MENU button π† √® To DIGITAL-IN AUDIO To select "ANALOG", "DIGITAL" or "AUTO" INITIAL SETUP PREVIOUS VIDEO-1MONITOR OUT DIGITAL-IN DIGITAL-IN AUDIO OFF SIZE1 DIGITAL Press the Menu button when finished Notes: NEXT PAGE SELECT OPERATE (1/5) MENU EXIT • If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG. • Refer to your DTV or HDMI component's instruction manual for more information. • When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page 71. • When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically, depending on the audio input from the HDMI. 52