JVC LT46P300 Instructions - Page 51

Advanced Programming Your Remote You can program your remote control to operate your external devices, using the instructions and codes on pages 51 - 57. How to set the codes 1) Manually turn on the device. 2) Change the remote control mode according to the device by pressing the MODE button. Refer to the following list for which mode to use. Device Applied for these devices TV JVC brand only STB Cable Set Top Boxes, Cable/PVR Combinations, Satellite Set Top Box DBS/PVR Combination VCR VCR, DBS/PVR Combination, PVR, DVD/PVR Combination DVD DVD Player, DVD Recorder, Home Theater in a Box, Receiver AUDIO Amplifier, Home Theater in a Box, Receiver 3) Find the remote control code for your device. See pages 53 - 57. 4) Set the remote code. TUNE 1 2 3 4 5 6 7 8 9 RETURN + TUNE 0 TV The mode indicator goes out for a second, then it lights. Press and hold Enter the four digit number 5) Point the remote at the device and press power. If your device did not turn off or respond, try another code. Notes: • If your device doesn't respond to any of the codes listed or is not listed, see page 52. • Some codes may have only limited functions. Try other codes that may have more functions. 51