JVC N370B Instruction Manual - Page 12

LANGUAGE Display Mode The Display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox - Displays a wide picture with bands on the upper and lower portions of the screen. Panscan - Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Menu Language Select a language for the Setup menu and then on-screen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original - Refers to the original language in which the disc was recorded. Other - To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 21. If you enter the wrong language code, press CLEAR. Off (for Disc Subtitle) - Turn off Subtitle. DISPLAY Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or a monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To Turn ON progressive scan: Connect component video out of this unit to the input of your TV or monitor, set your TV or monitor to Component Input. 1. Select "Progressive Scan" on the DISPLAY menu then press B. 2. Select "On" using the v / V buttons. 3. Press ENTER to confirm your selection. The confirm menu will appear. 4. When the confirm menu appears on your screen Cancel is highlighted as default. Use the b / B buttons to highlight Enter. 5. Pressing ENTER will set the player to Progressive scan mode. TV Output Select Set the playerʼs TV Output Select options according to the TV connection type. S-VIDEO - When your TV is connected with the S-VIDEO OUTPUT jack. YPbPr - When your TV is connected with the COMPONENT / PROGRESSIVE SCAN OUTPUT jacks on the DVD player. TV Aspect 4:3 - Select when a standard 4:3 TV is connected. 16:9 - Select when a 16:9 wide TV is connected. 12