JVC N370B Instruction Manual - Page 9
Installation and Setup
UPC - 046838034060
View all JVC N370B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Introduction Installation and Setup Installation and Setup Setting up the Player The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. DVD Player Connections Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information. Rear of TV Rear of DVD Player Video and Audio Connections to Your TV Make one of the following connections, depending on the capabilities of your TV. Cautions: • Do not connect the S-VIDEO OUTPUT and COMPONENT VIDEO OUTPUT jacks together to your TV, otherwise the color of video image will not be displayed properly. • Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system. S-Video - Connect the S-VIDEO OUTPUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S). Caution: You must set the [TV Output Select] option to [S-VIDEO] on the setup menu to use this connection. (See page 12.) Video - Connect the VIDEO OUTPUT jack on the DVD player to the video in jack on the TV using the video cable (V). Audio - Connect the left and right AUDIO OUTPUT jacks of the DVD Player to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the DVD Playerʼs AUDIO OUTPUT jack to the phone in jack (record deck) of your audio system. Component Video - Connect the COMPONENT / PROGRESSIVE SCAN OUTPUT jacks on the DVD Player to the corresponding jacks on the TV using an Y PB PR cable (C). Caution: You must set the [TV Output Select] option to [YPbPr] on the setup menu to use this connection. (See page 12.) Progressive Scan • If your television is a high-definition or "digital ready" television, you may take advantage of the DVD playerʼs progressive scan output for the highest possible video resolution. • Set the Progressive Scan to "On" on the setup menu for progressive scan signal. (Refer to page 12). • Progressive scan does not work with the analog video connections (yellow VIDEO OUTPUT jack and S-VIDEO OUTPUT jack). Operation Reference 9