JVC RCEZ38 Instruction Manual - Page 25
Troubleshooting
UPC - 046838021459
View all JVC RCEZ38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TROUBLESHOOTING • If you are having a problem with your unit, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Possible cause Action Power cannot be turned on. The power cord is unplugged. Connect the power cord. When 3 PLAY is pressed, tape does not 8 PAUSE is pressed. move. Press 8 PAUSE again to release it. Playback sound is at a very low level. • Batteries are run down. • The head is dirty. • Replace the batteries with new ones. • Clean the head. ¶ REC does not function. • The safety tabs of the cassette have • Reseal the slots with adhesive tape. been broken off. • No cassette is loaded. • Load a cassette. The disc is loaded but does not play. • The disc is upside down. • The disc is dirty. • The disc is damaged or warped. • The lens is dirty. • There is moisture condensation. • Load the disc with the label side facing up. • Clean the disc. • Replace the disc with a playable one. • Clean the lens. • Turn the unit on and wait one or two hours before use. No sound from the speakers. Headphones are connected. Disconnect the headphones. Since the tape speed is irregular, wow • The pinch roller or capstan is dirty. • Clean the pinch roller and capstan. and flutter occur. • Batteries are run down. • Replace the batteries with new ones. Radio reception is poor and there is The antenna is not properly adjusted. Adjust the antenna correctly. much static. Remote control is impossible. • Batteries in the remote control unit are • Replace the batteries with new ones. run down. • The remote sensor section is exposed • Try not to operate the unit under direct to bright light (direct sunlight, etc.) sunlight, etc. If this product does not function properly even after you have implemented the possible solutions given above Many functions of this product are implemented by microcomputers. If malfunction is caused by thunder or static electricity, or the main unit does not function properly even when you press a button, disconnect the power plug from the AC outlet, wait for a while, and then connect this product again. Note: When the unit is moved from a cold place of around 0˚C (32°F) to a warm place, it may not operate normally, because moisture has formed inside the unit. Normal operation will be restored after waiting one or two hours. 21