JVC RX-D205S Instructions - Page 12
USB connection - windows 7 drives
UPC - 046838023828
View all JVC RX-D205S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Digital connection This receiver is equipped with three DIGITAL IN terminals-one digital coaxial terminal and two digital optical terminals. To reproduce the digital sound, use the digital connection in addition to the analog connection methods described on pages 7 to 9. Digital coaxial cable (not supplied) Digital optical cable (not supplied) Turn off all components before making connections. • When you connect other components, refer also to their manuals. When the component has a digital coaxial output terminal, connect it to the 1(DVR/DVD) terminal, using a digital coaxial cable (not supplied). DIGITAL IN 1(DVR/DVD) 2(DBS) 3(VCR) USB connection This receiver is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC. When you connect your PC for the first time, follow the procedure below. • Remember you cannot send any signal or data to your PC from this receiver. IMPORTANT: Check if your PC equipped with the CD-ROM drive is running on Windows® 98 SE*, Windows® Me*, Windows® 2000*, or Windows® XP* and prepare its CD-ROM. How to install the USB drivers The following procedure is described using the English version of Windows® XP. If your PC is running on a different version of operation system or language, the screens shown on your PC's monitor will differ from the ones used in the following procedure. 1. Turn on your PC and start running Windows® 98 SE, Windows® Me, Windows® 2000, or Windows® XP. • If the PC has been turned on, quit all the applications now running. 2. Turn on the receiver, and select the source as "USB." 3. Set the volume to minimum. IMPORTANT: Always set volume to "0" when connecting or disconnecting other equipment. When the component has a digital optical output terminal, connect it to the 2(DBS) or 3(VCR) terminal, using a digital optical cable (not supplied). Before connecting a digital optical cable, unplug the protective plug. 4. Connect the unit to the PC using a USB cable (not supplied). USB NOTES • When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components: - 1(DVR/DVD): For DVD recorder or DVD player - 2(DBS): For DBS tuner - 3(VCR): For VCR If you connect other components, change the digital input (DIGITAL IN) terminal setting correctly. See "Setting the digital input (DIGITAL IN) terminals-DIGITAL IN 1/2/3" on page 20. • Select the correct digital input mode. See "Selecting the analog or digital input mode" on page 12. • When you want to operate the connected component (except DBS tuner) using the AV COMPU LINK remote control system (see pages 32 and 33), connect them also as described on pages 7 to 9. PC USB cable (not supplied) • Use "USB series A plug to B plug" cable when connecting. 10