JVC RX-D205S Instructions - Page 26

Adjusting the center channel localization for Pro Logic IIx Music and Pro Logic II Music-CENTER WIDTH This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 31. • If "CENTER SPK" is set to "NO" (see page 17), this item is not adjustable. • Once you have made an adjustment, it is memorized until you change the setting. • You cannot use the remote control for this setting. Adjustable range: OFF and 1 to 7 (in 1 step intervals) Initial setting: C WIDTH As the number increases, the center channel sound moves toward the left and right speakers. Normally, select "3." Adjusting the sound localization position for Pro Logic IIx Music and Pro Logic II Music- DIMENSION This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 31. • Once you have made an adjustment, it is memorized until you change the setting. • You cannot use the remote control for this setting. Adjustable range: 1 to 7 (in 1 step intervals) Initial setting: DIMENSION As the number increases, the sound localization moves towards forward from backward. Normally, select "4." Adjusting the sound localization of the center channel-CENTER GAIN This setting is available only when Neo:6 Music is in use. • If "CENTER SPK" is set to "NO" (see page 17), this item is not adjustable. • Once you have made an adjustment, it is memorized until you change the setting. • You cannot use the remote control for this setting. Adjustable range: 0 to 1.0 (in 0.1 step intervals) Initial setting: C GAIN As the number increases, the center channel will be localized clearly. Normally, select "0.3." Adjusting the center tone-CENTER TONE This setting is available when one of the Surround/DSP modes is in use. To activate Surround/DSP mode, see page 31. • If "CENTER SPK" is set to "NO" (see page 17), this item is not adjustable. • This setting is common to all Surround modes, and is memorized separately for DSP modes. Adjustable range: 1 to 5 (in 1 step intervals) Initial setting: C TONE As the number increases, the dialogue becomes stronger. Normally, select "3." • When the center tone is set to other than "C TONE ," the C.TONE indicator lights up on the display. From the remote control: Press SOUND, then C. TONE repeatedly to select the level you want to adjust. 1 2 3 4 5 6 7 8 9 10 0 10 NOTE After pressing SOUND, the numeric buttons work for sound adjustments. To use the numeric buttons to operate your target source, press the corresponding source selecting button before operation. Aligning the vertical localization of the center channel for Surround/DSP modes-CENTER ALIGN This setting is available when one of the Surround/DSP modes (except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and ALL CH STEREO) is in use. To activate Surround/DSP mode, see page 31. • If "CENTER SPK" is set to "NO" (see page 17), this item is not adjustable. • Once you have made an adjustment, it is memorized for each Surround/DSP mode. • You cannot use the remote control for this setting. C ALIGN C ALIGN Select this when you cannot feel as if the actors or singers are speaking or singing on the screen. Center alignment is turned off. Initial setting: C ALIGN 24