JVC S890 Instruction Manual - Page 11
Tuning in to a preset station, Manual preset
UPC - 046838105685
View all JVC S890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 - 3, AM) you want to store stations into (in this example, FM1). Each time you press the button, the band changes as follows: FM1 FM2 FM3 AM 2 Tune in to a station (in this example, of 88.3 MHz). To tune in to stations of higher frequencies To tune in to stations of lower frequencies Notes: • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again. Tuning in to a preset station You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see "Storing stations in memory" on pages 10 and 11. 1 Select the band (FM1 - 3, AM). Each time you press the button, the band changes as follows: FM1 FM2 FM3 AM 2 Select the number (1 - 6) for the preset station you want. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. Note: You can also use the 5 (up) or ∞ (down) button on the unit to select the next or previous preset stations. Each time you press the 5 (up) or ∞ (down) button, the next or previous preset station is tuned in. "P1" flashes for a few seconds. 4 Repeat the above procedure to store other stations into other preset numbers. 11