JVC SR-W5U Instruction Manual - Page 24

7 TAPE DUBBING When Playing Back on SR-W5U and Recording on Another Unit AC AC OUTPUT INTPUT ( ) MAX 100W 120V 60Hz Audio output LINE 1 LINE 2 LINE 3 LINE 1 LINE 2 R L VIDEO S INPUT R L VIDEO S OUTPUT R.A. EDIT PRE ROLL REMOTE AUDIO IN R L HD/S3(W-VHS) HD VIDEO IN AUDIO OUT3 Y PB PR HD(CAM/W-VHS) R L (HDTV/W-VHS) HD VIDEO OUT1 Y PB PR HD(HDTV/W-VHS) HD VIDEO OUT2 RGB(DISPLAY) To video input connector S Video (Video) output To audio input connector (To HD video/audio input) PHONES VOLUME REC LEVEL IR REMOTE MANUAL AUTO MIN MAX REMOTE PAUSE INPUT LINE4 OFF ON EDIT(HD REC) NR(W-VHS PLAY) ON OFF VIDEO L- AUDIO -R Y/C TIMING R C L TRACKING AUTO NR Another unit (as a recording machine) 1 Set the recording machine to external input. 2 Put the recording to a pause. SR-W5U (as a playback machine) 3 Start playback shortly before the section where you want to PLAY. • When noise appears during playback with W-VHS tape, set the NR switch to "ON". Another unit (as a recording machine) 4 Start recording at a section of the program you want to dub. 5 To finish, press the STOP button. Extra recording can be avoided by stopping the recording machine then the SR-W5U. SR-W5U (as a playback machine) 6 Press the STOP button. 7 If the NR switch was set to "ON" in step 3, set it back to "OFF". ● When dubbing a high vision video, use the HD video cable, provided that the recording VCR is equipped with the HD video input and HD audio input connectors. 24