JVC SR1000 Instruction Manual - Page 27
Antenna Aiming Options, Memory Options
UPC - 046838009655
View all JVC SR1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
8 Antenna Aiming Options 9 Memory Options This is required to be adjusted only when you use your JVC PnP at home. You can ensure optimum reception when locating the SIRIUS antenna. Upon entering this mode, two horizontal bar graphs are displayed. The satellite signal strength level is displayed on the SAT graph while the terrestrial signal strength level is displayed on the TER graph. The current reception levels are shown on the graphs. Move the antenna location so that the level indication on the bar graph moves as close to the right end as possible To exit this option, press MENU or SELECT. Note: Terrestrial repeaters are typically used in large urban areas where satellite signal reception is not stable. • Terrestrial signals (TER) may not be available in your residential area. You can activate or deactivate S-Seek Function. In addition, you can delete all stored PDT (see page 20) at a time. The following adjustments are possible on this submenu screen-"Automatic Memory Search" and "Clear All Memory". Automatic Memory Search: Press CHANNEL 5 / ∞ (or CH + / -) to select either "On" or "Off", then press SELECT. • On: To activate the S-Seek Function. • Off: To deactivate the S-Seek Function. Clear All Memory: Press CHANNEL 5 / ∞ (or CH + / -) to select either "Yes" or "No", then press SELECT. • Yes: To erase all stored PDTs. • No: To cancel the erasure. 27