JVC SR1000 Instruction Manual - Page 29

Alarm Clock You can set your JVC PnP to turn on at a specific time. The last selected stream prior to shutdown will be played when the Alarm turns on your JVC PnP. Program Alert You can program your JVC PnP to switch to a specified stream at a specified time. • To use your programmed setting, make sure to set "Program Alert" to "Program Alert On". Set Alarm: Press CHANNEL 5 / ∞ (or CH + / -) to select either "Alarm On" or "Alarm Off (default)", then press SELECT. The following settings are possible on this sub-menu screen- • Time/Day (default-12:00pm/Monday) • Stream (default-Currently Playing Stream) • Program Alert (default-Off) Alarm Time (default-12:00pm): Press CATEGORY # / @ (or CAT + / -) to set the hour, press CHANNEL 5 / ∞ (or CH + / -) to set the minute, then press SELECT. AM or PM will switch automatically as you advance the time. Note: If your JVC PnP cannot receive the SIRIUS signals (satellite and terrestrial) correctly when the alarm time comes, you may hear a series of alarm tones. Time/Day: Press CHANNEL 5 / ∞ (or CH + / -) to select either "Time" or "Day", then press SELECT. • Time: To set the time. Press CATEGORY # / @ (or CAT + / -) to set the hour, then press CHANNEL 5 / ∞ (or CH + / -) to set the minute, then press SELECT. AM or PM will switch automatically as you advance the time. • Day: To set the day. Press CATEGORY # / @ (or CAT + / -) to select the day-Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday, then press SELECT. Make sure to set both "Time" and "Day" correctly 29