JVC TK-C1460U Instruction Manual - Page 13
Connecting the control signal cable, Setting the switches, Setting on the MENU screen
View all JVC TK-C1460U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Ⅲ Connecting the control signal cable (Use a twisted-pair cable for connection. ੬ Page 17.) Camera 1 control signal connection terminals TX+ A TX B RX+ C RM-P2580 A RX + B RX C TX + Connect: Camera TX+ to RM-P2580 RX+ Camera TX- to RM-P2580 RX- Camera RX+ to RM-P2580 TX+ RX D Camera 2 control signal connection terminals TX+ A TX B RX+ C D TX Camera RX- to RM-P2580 TX- The A B C D marks indicated on both the camera terminals and the RM-P2580 terminals facilitate correct connections. Connect the terminals with identical marks. RX D Ⅲ Setting the switches (੬ Page 10) Select the synchronization method of the camera image. Set the switch on all cameras to LL (Line Lock) and match with the V. PHASE. (੬ Page 26.) SET AWC MENU CAMERA SETUP EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF NOT USED ON LL SIMPLEX ON EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF NOT USED ON LL SIMPLEX ON Set this switch to the DUPLEX * If the setting is changed, be absolutely sure to switch on the power again. IRIS VIDEO DC Set this switch to ON (signal termination ON) only on the camera placed at the end of the control signal cable. Set to OFF on all other cameras. Ⅲ Setting on the MENU screen (੬ Page 35) * If the setting is changed, escape from the menu screen once, and definitely switch on the power again. C OMMUN I C A T I O N S TYLE MACH I NE I D M. DROP 1 Set to M.DROP Set to M.DROP when the RM-P2580 is used as a remote control unit. When controlling from another machine, make sure that it matches the communication system used. MACHINE ID setting switches Set this item to match the RM-P2580 VIDEO INPUT terminal number for each camera. When connecting ● Turn OFF the power supply to all equipment to be used before making connections. ● Carefully read the Instructions for each piece of equipment to be used before making connections. ● For the appropriate connection cables and the length of these, carefully read "Connections on the back" on page 16. ● The control signal cable cannot be used for loop connection. E-13