JVC TK-C2201U Instruction Manual - Page 19

Adjustment 4 Adjust the image size Loosen the fastening screw for the zoom adjustment ring and move the ring to the left/right to adjust the image size. After adjustment is complete, fasten the screw with pressing it slightly toward the lens direction (toward the shooting direction). 5 Adjust the focus ① Hold the focus adjust gear knob, shift the catch from point A to point B as illustrated in the diagram to disengage the gear. Note To prevent the gear shaft from breaking when the gear is opened too far out from B, remove the gear shaft from the bearing (C in diagram). In this case, re-insert the shaft back into the bearing C and return it to the original position before using. ② Loosen the fastening screw for the focus adjustment ring and move the ring to the left/right to adjust the focus. .. Knob Catch B A Focus adjustment ring Zoom adjustment ring Focus adjust gear C 19