JVC VN-H257U Instruction Manual - Page 43
Set values: Pin Input1 Make, H257U/H257VPU
View all JVC VN-H257U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
B 1st Trigger Select the 1st trigger to perform an action. VN-H57U/H257U/H257VPU/H157WPU [Set values: Pin Input1 Make, Pin Input1 Break, Pin Input2 Make, Pin Input2 Break, Position, Audio Detection1, Audio Detection2, Motion Detection, Tampering Detection, Black & White, Day/Night, Time] VN-H37U/H137U/H237U/H237VPU [Set values: Position, Motion Detection, Tampering Detection, Day/Night (VN-H37U and VN-H237VPU only), Time] Memo: ● When the [2nd Trigger] is disabled, an action will be performed when only [1st Trigger] is triggered. ● You can set [Max. Interval] and [2nd Trigger] only if "Pin Input1 Make", "Pin Input1 Break", "Pin Input2 Make" and "Pin Input2 Break" are selected for the [1st Trigger]. (VN-H57U/H257U/H257VPU/H157WPU only) C Max. Interval (VN-H57U/ H257U/H257VPU/ H157WPU only) D 2nd Trigger (VN-H57U/ H257U/H257VPU/ H157WPU only) E Mail This is available when both [1st Trigger] and [2nd Trigger] are set. Specify the maximum interval between each trigger for [1st Trigger] and [2nd Trigger]. An action will be performed if [2nd Trigger] occurs within the maximum time interval after [1st Trigger] occurs. [Set values: 1 - 3600] sec Select the 2nd trigger to perform an action. [Set values: Disable, Pin Input1 Make, Pin Input1 Break, Pin Input2 Make, Pin Input2 Break] Mail Settings Mail Address : If you have set the [SMTP Server], [Port Number], and [Sender Mail Address] on the [Alarm Environment] page, the "Configured" message is shown. If not set, the "Not configured" message is shown. For details about the mail setup, refer to [Alarm Environment] page. (A Page 46) : Enter the recipient's mail address. Mail Text : Enter the mail text. You can enter text consisting of up to 127 alphanumeric characters. Or a text of up to 63 double-byte characters can be entered. JPEG Attachment : Specify whether or not to attach an image file to the mail. To attach JPEG images, check the Attach box and select the transmission channel. Encoder : Specifies an Encoder No. for encoding of attached JPEG files. Memo: ● You cannot select [JPEG Attachment] if there is no channel with Encode set to JPEG. ● When trigger is set to [Black and White to Color] or [Color to Black and White] and [Mail] is selected for [Action], the image attached to the email may be either in Color or Black and White, but neither can be set. * The [Set values] in bold letters are factory defaults. 43