JVC XVC26U Instruction Manual - Page 35
Elapsed Recording Time Indication, Tape Remaining Time, Second Audio Recording
UPC - 046838013126
View all JVC XVC26U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Filename [XVC27U_07S-VHS.fm] XVC27U_07S-VHS.fm Page 35 Thursday, January 8, 2004 11:28 AM Masterpage:Right-No-Heading EN 35 Elapsed Recording Time Indication 1 Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. 2 Reset the counter. Press C.RESET before starting recording or playback. ● The counter is reset to "0:00:00" and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback. Tape Remaining Time Press DISPLAY until the time remaining on the tape appears. ● The front display panel shows the tape remaining time with ":" blinking. ● By pressing the DISPLAY button, you can change display to show the channel position*, clock time, counter reading or tape remaining time. * Channel position is not displayed during playback. NOTES: ● When you press ON SCREEN, the on-screen display appears on the TV screen for 5 seconds, then the displays other than the counter disappears. To clear the counter display, press ON SCREEN. ● Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct. "- -:- -" may sometimes appear with ":" blinking, or the display may blink on occasion. Second Audio Recording This unit's built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set "2ND AUDIO RECORD" to "ON". (੬ pg. 76) NOTE: When the channel is changed on the unit; ● The "STEREO" indicator appears on the screen for about 5 seconds if the program is a stereo broadcast. ● The "SAP" indicator appears on the screen for about 5 seconds if the program is a SAP broadcast. ● Both indicators appear when a stereo program is accompanied by SAP sound. Page 35 8 January 2004 11:28 am