JVC XVC26U Instruction Manual - Page 47
VFP function, Access the VFP setting menu., Select the VFP mode., Access USER menu.
UPC - 046838013126
View all JVC XVC26U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Filename [XVC27U_08DVD.fm] XVC27U_08DVD.fm Page 47 Thursday, January 15, 2004 12:12 PM Masterpage:Right-No-Heading VFP function - Adjusting the picture quality The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programing, picture tone or personal preference. NOTE: Before you start operation; The VFP setting screen disappears if no operations are done for more than about 10 seconds. If the setting screen disappears before you finish, start from step 1 again. 1 Access the VFP setting menu. Press DVD PICTURE during playback. ● The current setting appears on the TV screen. NORMAL GAMMA 0 BRIGHTNESS 0 CONTRAST 0 SATURATION 0 TINT 0 SHARPNESS +3 EN 47 4 Select the parameter. Press rt repeatedly to select a parameter you want to adjust, then press ENTER. ● Adjust gradually and confirm picture appearance results are as preferred. GAMMA (-3 to +3): Controls brightness of neutral tints while maintaining brightness of dark and bright portions. BRIGHTNESS Controls screen brightness. (-8 to +8): CONTRAST (-7 to +7): Controls screen contrast. SATURATION Controls screen color depth. (-7 to +7): TINT (-7 to +7): Controls screen tint. SHARPNESS Controls screen sharpness. (-8 to +8): ● VFP menu disappears and the following pop-up window appears on the TV screen. 2 Select the VFP mode. Press w e repeatedly. ● Each time you press w e, the VFP mode changes as follows: NORMAL]CINEMA]USER 1]USER 2](Back to the beginning) NORMAL: CINEMA: USER 1/ USER 2: Select this normally. Suitable for movie. You can adjust parameters that affect picture appearance and store settings. Go to step 3. NOTE: You cannot adjust the parameters of "NORMAL" and "CINEMA". To adjust picture appearance manually 3 Access USER menu. Press w e repeatedly to select "USER 1" or "USER 2". USER 1 GAMMA 0 BRIGHTNESS 0 CONTRAST 0 SATURATION 0 TINT 0 SHARPNESS +3 GAMMA 0 GAMMA 0 ● The selection menu disappears automatically if you do not change the selection for 10 seconds. 5 Adjust the parameter. Press rt repeatedly to change the setting, then press ENTER. ● The current VFP settings appear again. 6 Adjust the other parameters. Repeat steps 4 and 5 to adjust other parameters. To return to the normal screen Press DVD PICTURE. To activate your setting Press DVD PICTURE, then press w e repeatedly to select "USER 1" or "USER 2" that you have changed the parameters. Page 47 15 January 2004 12:12 pm