Jabra BT325S User Manual - Page 5

English What your new headset can do The Jabra BT325s lets you listen to your favorite stand-alone music player, while ensuring that you never miss a call from your Bluetooth enabled mobile phone. Your Jabra BT325s lets you do all this, when acting as a Bluetooth headset: • Pair with up to 8 devices • Answer calls • End calls • Reject calls* • Voice dialing* • Mute • Last number redialing* • Call waiting* • Place call on hold* * Phone dependent Specifications: • Talk time up to 8 hours/standby time up to 240 hours • Rechargeable battery with charging option from AC power supply • Weighs less than 1.4oz (40 g) incl. the original Jabra headphones • Operating range up to 33 feet (approx. 10 meters) • Handsfree (default) and Headset Bluetooth profiles* • Bluetooth* specification 1.2 • Ingress Progress Rating IP22* (The Jabra BT325s can withstand a short rain shower) * See glossary Please note that your Jabra BT325s can withstand a short rain shower but is not waterproof and cannot be submerged. If your device gets wet, it should be wiped clean of any traces of water in order to protect it from potential damage. GETTING STARTED The Jabra BT325s is easy to operate. All buttons are dedicated to control your mobile phone calls, and the buttons performs different function depending on how long you press them: Instruction: Duration of press: Tap Press Press and hold Press briefly and let go Approx: 1 second Approx: 5 seconds  1 Charge your Jabra BT325s Fully charge your Jabra BT325s for two hours before you start using it. Use only the chargers provided in the box - do not use chargers from any other devices as this might damage your Jabra BT325s. Connect the Jabra BT325s as shown in fig. 2 to the AC power supply to charge from a power socket. When the indicator lights are solid red, your headset is charging. When the lights turn to green, the headset is fully charged. 2 Turn on your Jabra BT325s • Press the answer/end button to turn on the Jabra BT325s - when the device is on the LED indicator light will flash four times. • Press and hold the answer/end button to turn the device off Note that the Jabra BT325s can still play music from the stand-alone music player even though the Jabra BT325s is turned off. 3 Pairing with a mobile phone Before using the Jabra BT325s with a mobile phone, you must first pair it. 1. Put the Jabra BT325s into pairing mode: • Make sure the headset is turned off. • Press and hold the answer/end button until the indicator light is solid blue. 2. Set your mobile phone to 'discover' the Jabra BT325s Follow your phone's instruction guide. This usually involves going to a 'set up' 'connect' or 'Bluetooth' menu on your phone and selecting the option to discover or add a Bluetooth device. (See example from typical mobile phone in fig. 4) 3. Your phone will find the Jabra BT325s Your phone will ask if you want to pair with it, accept this with 'yes' or 'ok' and confirm with the passkey or PIN=0000 (4 zero's) Your phone will confirm when pairing is complete. In case of unsuccessful pairing repeat steps 1 to 3.  English