Jabra BT325S User Manual - Page 6

English 4 Wearing your Jabra BT325s Your Jabra BT325s is designed to be comfortably worn using the integrated clothing clip or lanyard loop (lanyard not included). The microphone is integrated on the top left side of the device (when viewing the Jabra BT325s as shown in figure 3. A). Please take this into account when positioning the main device to ensure a clear pickup of your voice. (See fig. 3. B) 5 Listening to your music from your stand-alone music player The Jabra BT325s realizes its full potential when used in conjunction with a stand-alone music player. This could be an MP3-player, a portable media center or any other external music device, featuring a standard 3.5mm stereo connector. To use the Jabra BT325s with your music player, plug the 3.5 mm jack into the headphone socket on your music player. You are now able to listen to your favorite tunes whilst ensuring that you will never miss a call from your Bluetooth enabled mobile phone. Please note that all controls on the Jabra BT325s are dedicated for controlling your mobile phone calls. Controlling your music, ex. start/stop, skip track forward/backward, volume etc., must be done from your music device. The Jabra BT325s is compatible with most stand-alone music players. 6 How to.... Listen to music Plug in the 3.5mm fixed cord into your stand-alone music device. The Jabra BT325s does not need to be turned on for listening to music. You can also unplug the headphones and insert them directly into the music device as regular headphones. Answer a call Tap the answer/end button on your Jabra BT325s to answer a call when phone is ringing. Music will fade automatically when an incoming call comes in. End a call Tap the answer/end button to end an active call. Music will automatically resume after the call.  Reject a call* Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to voice mail or hear a busy signal. Make a call* When you make a call from your mobile phone the music will fade and the call will (subject to phone settings) automatically be transferred to the Jabra BT325s when connected. Activate voice dialing* Tap the answer end button and speak the name. For best results, please record the voice-dialing tag when you are wearing the Jabra BT325s. Please consult your phone's user manual for more info on using this feature. Redial last number* Press the answer end button. Call waiting and placing a call on hold* This lets you place a call on hold during conversation to answer an incoming call. • Press the answer/end button once to put the active call on hold and answer the incoming call • Press the answer/end button to switch between the two calls • Tap the answer/end button to end the active conversation Adjust sound and volume Press the volume up or down (+ or -) to adjust the volume. (See fig. 1 1 ) To mute, press both the volume up and down at the same time. • To un-mute, tap either of the volume buttons. *Phone dependent 7 Exchanging the Jabra headphones In order to exchange your supplied Jabra headphones with your favourite set, simply plug your headphone jack into the headphone socket on the Jabra BT325s. If using another set of headphones than the supplied Jabra model, please note that differences in impedance and sensitivity might limit or increase the maximum volume output level. An impedance level of 32 Ohm is recommended for the best performance. However, always use extra precaution when using another set of headphones than the original Jabra model.  English