Jabra CRUISER2 User manual - Page 15

english I can not connect speakerphone and radio via FM transmitter - Make sure the radio is turned on and speakerphone is in FM mode (FM Status Icon is on). - If your radio when searching is not able to find the FM frequency set by your speakerphone, the FM frequency must be tuned in manually on the radio. Please read radio manual to find out how to manually change frequency on your radio. - If your radio is in TA (Traffic Announcement) mode, switch TA off and your radio should be able to find your speakerphone when using the search function on the radio. If not tune in manually. - The sensitivity of the search function on your radio determines whether it is able to find the frequency set by your speakerphone. On some radios you are able to adjust the sensitivity thus making it possible to find the speakerphone frequency when searching. If not tune in manually. - In urban areas it might be difficult to find a clear frequency. It is therefore advisable to use a frequency in the lower or upper end of the FM frequency band (e.g. 88.1 or 107.7 MHz) where you will have the best chance to find a clear frequency. Need more help? 1. Web: www.jabra.com/nasupport (for the latest support info and online User Manuals) 2. Phone: 1 (800) 327-2230 (U.S) 1 (800) 489-4199 (Canada) Taking care of your Speakerphone - Always store the Jabra CRUISER2 with the power off and safely protected. - Avoid storage at extreme temperatures (above 45°C/113°F - including direct sunlight - or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. - Do not expose the Jabra CRUISER2 to rain or other liquids. Jabra CRUISER2 14