Jabra DRIVE User manual - Page 12

english Function Release active/activate held Hold active and activate held call Release held call How to perform Tap the answer/end button Press the answer/end button Double tap the answer/end button TROUBLESHOOTING & FAQ I hear crackling noises Bluetooth is a radio technology, which means it is sensitive to objects between the speakerphone and the connected device. It is designed for the speakerphone and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc.). I cannot hear anything in my speakerphone - Increase the volume in the speakerphone. - Ensure that the speakerphone is paired to a device that is playing. - Make sure your phone is connected to the speakerphone by tapping the answer/end button. I am having pairing problems - You may have deleted your speakerphone pairing connection in your mobile phone. Follow the pairing instructions. I want to reset the pairing list in my speakerphone The speakerphone registers a list of up to 7 mobile phones. To remove the list: 1) Put your Jabra DRIVE in the pairing mode by long press on the answer/end button; 2) The press Volume down button while holding your finger on the answer/end button. A beep and a purple flash of the status light indicate the list was removed from the speakerphone memory. The next time you power on, the speakerphone will go into pairing mode as the first time you powered your new Jabra DRIVE on. Jabra DRIVE 11