Jabra EASYGO User manual - Page 11

english In order to use the headset with two mobile phone please make sure you have "paired" the Jabra EASYGO with both phones. See the section "PAIRING IT WITH YOUR PHONE" for instructions. Once you have "paired" your headset with two phones simply make sure your headset is on, and that Bluetooth® is enabled on the phones and the headset will then automatically connect to both phones. Please note that Last Number Redial will dial the number from the last outgoing call, independent of the mobile phone, and the Voice Dialling function will only work on the last paired mobile phone. TROUBLESHOOTING & FAQ I hear crackling noises - Bluetooth® is a radio technology, which means it is sensitive to objects between the headset and the connected device. It is designed for the headset and the connected device to be used within 10 meters (33 feet) of each other, with no major objects in the way (walls, etc.). I cannot hear anything in my headset - Increase the volume in the headset. - Ensure that the headset is paired to a device that is playing. - Make sure your phone is connected to the headset by tapping the Answer/End button. I am having pairing problems - You may have deleted your headset pairing connection in your mobile phone. Follow the pairing instructions. I want to reset the headset It is possible to reset the headset. Turn the headset ON. Then 'Press and hold' the volume down and answer/end buttons at the same time for approx. 5 seconds until the battery icon and Bluetooth® icon flash 5 times simultaneously - then the pairing list is reset. - Turn the headset OFF . The next time you power on, the headset will go into pairing mode as the first time you powered your new EASYGO on. Jabra EASYGO 9