Jabra EASYGO User manual - Page 8

english CONNECTIVITY MobilSurf BLUETOOTH Infrared port Wap options Synchronization Networks SELECT DEVICES FOUND Jabra EASYGO Jabra EASYGO Passkey: **** SELECT OK HANDSFREE Jabra EASYGO added. The handsfree is now ready for use SELECT Manual pairing mode If you wish to use the headset with a different phone, or if the pairing process was interrupted, you can manually set the headset to pairing mode. Make sure the headset is on. Press and hold the answer/end button for approximately 5 seconds until the Bluetooth® icon turns from a steady light to a flashing light. Then repeat steps 2 and 3 in the above pairing guide. Connecting with your phone Pairing is only needed the first time a headset and phone are used together. When the headset and phone have been paired once, they will automatically connect when the headset is on and Bluetooth® is activated on the phone. The headset can be used when it is "connected" to the phone. If the devices are paired, but do not immediately connect, tap the answer/end button. When your headset is connected the Bluetooth® connection icon in the STATUSDISPLAY™ WILL BE CONSTANT ON FOR 3 SECONDS and the headset voice guidance will say "connected". WEARING STYLE The Jabra EASYGO is ready to be worn with or without the ear hook. The ear hook can be removed and the headset can be used with the Ultimate-fit Eargels™. The Ultimate-fit Eargels™ can be used for both left and right wearing. The Ultimate-fit Eargels™ come in two different styles to fit any ear. You can also twist the eargel slightly to optimize the fit and comfort. For optimal performance, wear the Jabra EASYGO and your mobile phone on the same side of your body or within line of sight. You will get better performance when there are no obstructions between your headset and your mobile phone. Jabra EASYGO 6