Jabra GN9125 Reference Guide - Page 2

English - GN9120/GN9125 reference guide This reference guide provides you with additional information on setting up, using and maintaining your GN9120/GN9125. Note: The illustrations in the reference guide refer to the Mono version (one earpiece), but also apply to the Duo version (two earpieces) and the GN9125. Contents 1. Product Information 2 Verify the assembly of your GN9120/GN9125 Battery charging and use 2. Features and customisation 3 Multifunction button Functionality of the + and - buttons Positioning of microphone 3. Remote handset lifting functionality 4 Answering and making telephone calls with GN1000 or Electronic Hook Switch GN9120/GN9125 with Electronic Hook Switch (EHS) 4. Audio and visual indicators 5 5. Troubleshooting 6 6. Reconfiguration 7 Replacing the battery Memory reset Registering a new master headset 7. Cleaning, safety and maintenance 7 1. Product information Congratulations on purchasing the GN9120/GN9125. The GN9120/GN9125 is a wireless headset solution, made up of a cordless headset and a base unit that is connected to your desk telephone. The GN9120/GN9125 gives you full mobility, hands-free convenience and superior sound quality for your telephone conversations. Verify the assembly of your GN9120/GN9125 When removing the headset from the base unit, the green link-up indicator on the front of the base unit will light and the on-line indicator on the headset will flash. If the green link-up indicator does not light, check the wiring connections on the base unit and ensure that the power adapter is connected. If the on-line indicator on the headset does not flash continuously, replace the headset in the base unit and remove it again. Battery charging and use When not in use, place the headset in the base unit to charge the battery. Ensure the link-up indicator is not lit. If the link-up indicator is lit after placing the headset, remove the headset from the base unit and place it in the base again. If battery charge is too low, a beep will be heard in the headset every 20 seconds.  Note: The battery charging indicator on the base unit will flash continuously during charging and be lit when the battery is fully charged. 2. Features and customisation Multifunction button The multifunction button enables several functions, depending on how long the button is pressed for. Functions Answer/make call* End call* Conference mode Tone control adjustment Low power mode on (European versions only) Low power mode off (European versions only) Press momentarily √ √ √ Press for 5 sec. √ (MFB and "-" simultaneously) √ (MFB and "+" simultaneously) Press for 6 sec. √ * Only with GN1000 or EHS mode Functionality of the + and - buttons The + and - buttons enable several functions, depending on how long the button is pressed for. Functions Volume + Volume - Mute / un-mute Transmit volume adjustment Press momentarily √ √ √ "+"/"-" simultaneously to enter mode, then "+" or - for adjusting Press twice within 1 sec. √ Press "-" twice within 1 sec. Positioning of microphone Adjust the boom arm of your headset so that the microphone is positioned in the direction of your mouth, as close as possible to your mouth. Note: The boom arm cannot be rotated a full 360 degrees. Do not force the boom arm when it cannot be rotated any further.