Jabra HALO2 User manual - Page 11

english I cannot hear music in the headset - Ensure that the headset is connected to your Bluetooth enabled device. - You may have been out-of-range (10 meters) to your Bluetooth enabled device or the headset might have experienced an ESD (Electrostatic discharge) incidence. Press the Multi Function Button to re-establish the Bluetooth audio link. - Increase the volume on your device. - Make sure that the Jabra HALO2 is charged. The music I hear sounds very poor Make sure the other device supports Bluetooth 1.1 or higher including the Advanced Audio Distribution Profile (A2DP) for music streaming. If the above procedure did not help then it is possible that your phone is using the stereo audio connection in a different way. You can enable this mode on Jabra HALO2 by performing pairing in the following way: - Remove the Bluetooth connection to Jabra HALO2 on your phone - Make sure the headset is on (un-folded) - Press and hold the answer / end button for more than 5 seconds until the both Display icons are solid Blue and solid Orange - Go through the regular steps in pairing the headset to a Bluetooth device. Be aware that standby time of the Jabra HALO2 can be lower when using this pairing. Taking care of your headset - Always store the Jabra HALO2 with the power off and safely protected - Avoid storage at extreme temperatures (above 45°C/113°F - including direct sunlight - or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. - Do not expose the Jabra HALO2 to rain or other liquids. Jabra HALO2 10