Jabra HALO2 User manual - Page 6
Turning Your Jabra Halo2 On And Off, Pairing Your Jabra Halo2 To A Phone Or, Other Device - manual
View all Jabra HALO2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
english Turning your Jabra HALO2 on and off Unfolding the headset will turn it on. Folding the headset will turn it off. - To fold: Carefully extend the headset at the hinges (3) and fold. The headset will now conveniently fold into a compact size. - To unfold: Carefully unfold the headset and lock the hinges into place. The headset will automatically turn off after 10 minutes if not connected to a device. Pairing your Jabra HALO2 to a phone or other device Headsets are connected to phones or other Bluetooth devices using a procedure called 'pairing'. By following a few simple steps, pairing can be done in a matter of seconds. 1. Put the headset in pairing mode 1.a. First time pairing - Fold and Unfold the headset and the Jabra HALO2 will automatically enter pairing mode (indicator light (5) is solid blue) and start searching for a device. 1.b. Later pairing - Press and hold the Answer/End button (1) until the indicator light (5) is solid blue (approximately 4 seconds). 2. Set your Bluetooth phone or device to search for the Jabra HALO2 - Follow your phone's instruction guide. First make sure that Bluetooth is activated on your mobile phone. Then set your phone to search for the headset. This usually involves going to a 'setup,'' connect' or 'Bluetooth' menu on your phone and selecting the option to search for or 'add' a Bluetooth device.* 3. Your phone will find the Jabra HALO2 - The phone will find the headset under name "Jabra HALO2". - Your phone then asks if you want to pair with the headset. - Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. * Refer to phone's user manual Jabra HALO2 5