Jabra SUPREME UC User manual - Page 14

ENGLISH I hear crackling noises - Check that the headset and the phone/device are within 10 meters (33 feet) of each other, and that there are no obstructions between the two. I cannot hear anything in my headset - Increase the volume in the headset. - Ensure that the headset is paired to a device. - Ensure your phone is connected to the headset by tapping the Answer/End button. I am having pairing problems - You may have deleted your headset pairing connection in your mobile phone/device. Follow the pairing instructions to pair it again. I want to reset the pairing list in my headset - The headset registers a list of up to 7 mobile phones. To clear the pairing list and reset the Jabra SUPREME UC to factory settings, turn on the Jabra SUPREME UC while simultaneously holding the Volume Up (+) and Answer/end button for 6 seconds. The next time the headset is turned on it will automatically enter pairing mode. Will the Jabra SUPREME UC work with other Bluetooth devices? - The Jabra SUPREME UC is designed to work with Bluetooth mobile phones/devices supporting a headset, hands-free and/or advance audio distribution profile, and compliant with Bluetooth version 1.1 or higher. I cannot use Reject call, call on hold, Redial or voice dialing - These features are dependent on the ability of your phone/ device to support a hands-free profile. Even if the handsfree profile is implemented reject call, call hold and voice dialing are optional features which are not supported by all phone/ devices. Please consult your phone/device manual for details. Please note some features can only be operated from the primary device e.g. voice dial using Jabra SUPREME UC with 2 mobile phones. My headset does not announce the caller names during JABRA SUPREME 13