Jabra SUPREME UC User manual - Page 6

ENGLISH PAIR A NEW OR SECOND DEVICE 1. Ensure that the Jabra SUPREME UC is turned on. 2. Tap the Voice Control button on the Jabra SUPREME UC until you are prompted to "Say a command". 3. Say "Pair new device" and follow the pairing instructions. NOTE: If you have disabled Voice Guidance and Control you can put Jabra SUPREME UC in pairing mode manually by holding the Answer/end button while flipping the boom arm to On position. The Status Display will flash blue to indicate that you are in pairing mode. RE-PAIRING THE JABRA LINK 360 ADAPTER 1. Remove the Jabra LINK 360 adapter from the PC, and turn off the Jabra Supreme UC and other headsets. 2. Put the Jabra Supreme UC in pairing mode by press and holding the Answer/end button and opening the flip boom arm. Release the button when you hear "Welcome, you are now ready for pairing". 3. Put the Jabra LINK 360 adapter into the PC to begin pairing automatically. It can take up to 1 minute to pair. The Jabra LINK 360 status LED will flash blue. When the status LED turns steady blue, the pairing is complete. TIP: For extra functionality download and install Jabra PC Suite from www.jabra.com/setup, and run Jabra Control Center. JABRA SUPREME 5