Jabra WAVE Product Manual - Page 7

english TURNING YOUR HEADSET ON AND OFF - Slide the on/off button towards the symbol "I" to turn the headset ON. When you do so both indicators will flash on the Jabra StatusDisplay™. - Slide the on/off button towards the symbol "O" to turn the headset off. PAIRING IT WITH YOUR PHONE Headsets are connected to phones using a procedure called 'pairing'. By following a few simple steps, a phone can be paired with a headset in a matter of minutes. 1 Put the headset in pairing mode - When you turn on your Jabra WAVE for the first time, the headset will automatically start up in pairing mode - i.e. it is discoverable for your phone. When the headset is in pairing mode the Bluetooth® status indication on the StatusDisplay™ is flashing. 2 Set your Bluetooth® phone to 'discover' the WAVE - Follow your phone's instruction guide. First make sure that Bluetooth® is activated on your mobile phone. Then set your phone to discover new devices. This usually involves going to a 'setup,''connect' or 'Bluetooth' menu on your phone and selecting the option to 'discover' or 'add' a Bluetooth® device.* 3 Your phone will find the Jabra WAVE - Your phone will find the headset under name "Jabra WAVE". Your phone then asks if you want to pair with the headset. Accept by pressing 'Yes' or 'OK' on the phone. You may be asked to confirm with a passkey or PIN. Then use 0000 (4 zeros). Your phone will confirm when pairing is complete and the Bluetooth® status indication on the StatusDisplay™ will shift from flashing light to steady light and the headset voice guidance will say "connected". * Phone dependent Jabra WAVE 5