Jabra WAVE Product Manual - Page 8

english CONNECTIVITY MobilSurf BLUETOOTH Infrared port Wap options Synchronization Networks SELECT DEVICES FOUND Jabra WAVE Jabra WAVE Passkey: **** SELECT OK HANDSFREE Jabra WAVE added. The handsfree is now ready for use SELECT Manual pairing mode If you wish to use the headset with a different phone, or if the pairing process was interrupted, you can manually set the headset to pairing mode. Make sure the headset is on. Press and hold the answer/end button for approximately 5 seconds until the Bluetooth® icon turns from a steady light to a flashing light. Then repeat steps 2 and 3 in the above pairing guide. Connecting with your phone Pairing is only needed the first time a headset and phone are used together. When the headset and phone have been paired once, they will automatically connect when the headset is on and Bluetooth® is activated on the phone. The headset can be used when it is "connected" to the phone. If the devices are paired, but do not immediately connect, tap the answer/end button. When your headset is connected the Bluetooth® connection icon in the StatusDisplay™ will be constant on for 3 seconds and the headset voice guidance will say "connected". WEARING STYLE The Jabra WAVE follows Jabras popular behind the ear wearing style. It can be worn on both ears simply by twisting the eargel. Jabra WAVE comes with two different Jabra Comfort EargelsTM to fit any ear. You can also twist the eargel slightly to optimize the fit and comfort. For optimal performance, wear the Jabra WAVE and your mobile phone on the same side of your body or within line of sight. You will get better performance when there are no obstructions between your headset and your mobile phone. Jabra WAVE 6