Jenn-Air JDRP536HM Installation Instructions - Page 10

INSTALLATION INSTRUCTIONS Unpack the Range WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 2. For 48" (121.9 cm) models only, rotate center support counterclockwise off the pallet until it stops. Remove shipping materials, tape, and film from range. Keep shipping pallet under range. Remove oven racks, and parts package from inside oven. Remove grates from top of oven. Remove Kick Plate 1. Your range will have the kick plate packaged on top of the unit. a. Remove kick plate from top of range and grate pack. In packaging A NOTE: This support is used only for shipping and is not needed for installation. 3. Lay a piece of cardboard from packaging on the floor behind range. Using two or more people, firmly grasp each side of range. Lift range up about 3" (8.0 cm) and move it back until range is off shipping pallet. Set range on cardboard to avoid damaging floor. A. Kick plate Packaging removed A A. Kick plate b. Lay kick plate to the side to avoid scratching. 10