Jenn-Air JGC3215GS Installation Instruction - Page 4

Installation Clearances IMPORTANT: If installing a range hood or microwave hood combination above the cooktop, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. D B C Flush Installation Dimensions All cooktops can be mounted with a frameless standard installation sitting on top of the countertop surface or flush with the top of the countertop. If the cooktop is to be mounted flush with the countertop, a 11/64"-deep (4.3 mm) recessed area surrounding the cooktop cutout must be provided with the following dimensions. NOTE: This option is not recommended for countertops with a molded backsplash. Do not silicone seal in place. A D B C I A AG H F J E A. 18" (45.7 cm) minimum clearance upper cabinet to countertop B. Cabinet C. See the "Multi-Unit Dimensions" table. D. 13" (33 cm) maximum recommended upper cabinet depth E. 6" (15.2 cm) minimum side wall clearance F. 30" (76.2 cm) minimum clearance between top of cooktop platform and bottom of uncovered wood or metal cabinet (24" [61 cm] minimum clearance if bottom of wood or metal cabinet is covered by not less than 1/4" [0.6 cm] flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper) G. 25/16" (5.9 cm) minimum distance to rear combustible surface H. 25/16" (5.9 cm) minimum distance to front countertop edge I. See the "Multi-Unit Dimensions" table. J. Cutout depth 203/8" (51.8 cm) Multi-Unit Dimensions Units Upper Cabinet Cutout Width (C) Width (I) One 15" (38.1 cm) unit Two 15" (38.1 cm) units Three 15" (38.1 cm) units Four 15" (38.1 cm) units 30" (76.2 cm) cooktop and one 15" (38.1 cm) unit 30" (76.2 cm) cooktop and two 15" (38.1 cm) units 36" (91.4 cm) cooktop and one 15" (38.1 cm) unit 15" (38.1 cm) 30" (76.2 cm) 45" (114.3 cm) 60" (152.4 cm) 45" (114.3 cm) 60" (152.4 cm) 51" (129.5 cm) 143/8" (36.5 cm) 293/8" (74.6 cm) 447/16" (112.9 cm) 597/16" (151.0 cm) 443/8" (112.7 cm) 597/16" (151.0 cm) 503/8" (128.0 cm) NOTE: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the burner box. To avoid this modification, use a base cabinet with sidewalls wider than the cutout. If cabinet has a drawer, a 4" (10.2 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required. The drawer depth may need to be shortened to avoid interfering with the regulator and power cord. F E Cooktop E Foam Strip A. Recessed area length 213/16" (53.8 cm) B. Cutout length 203/8" (51.8 cm) C. See the "Multi-Unit Flush Dimensions" table. D. See the "Multi-Unit Flush Dimensions" table. E. Recessed area depth 11/64" (4.3 mm) F. Recessed area radius 5/64" (2.0 mm) maximum Multi-Unit Flush Dimensions Units Recessed Cutout Area Width (D) Width (C) One 15" (38.1 cm) unit Two 15" (38.1 cm) units Three 15" (38.1 cm) units Four 15" (38.1 cm) units 30" (76.2 cm) cooktop and one 15" (38.1 cm) unit 30" (76.2 cm) cooktop and two 15" (38.1 cm) units 36" (91.4 cm) cooktop and one 15" (38.1 cm) unit 151/8" (38.4 cm) 301/8" (76.5 cm) 451/8" (114.6 cm) 601/8" (152.7 cm) 451/8" (114.6 cm) 601/8" (152.7 cm) 511/8" (129.9 cm) 143/8" (36.5 cm) 293/8" (74.6 cm) 447/16" (112.9 cm) 597/16" (151.0 cm) 443/8" (112.7 cm) 597/16" (151.0 cm) 503/8" (128.0 cm) IMPORTANT: If multiple units are installed side by side, the mounting bridge kit W11031680 is needed for proper installation. 4