Jenn-Air JGD8130ADS Dimension Guide - Page 1
Jenn-Air JGD8130ADS Manual
View all Jenn-Air JGD8130ADS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600 This Data Sheet Includes Information On Jenn-Air • Product Model Number (s): • 30" Convertible Cooktops: JGD8130ADW, JGD8130ADS and JGD8130ADB see below 30" 21 3/4" Side View (not to scale) • Dimensions (Actual Size) • Overall width: 30" Overall depth: 21 3/4" Distance from top of counter to bottom of unit: see below Cut-Out width: 29" Cut-Out depth: 21" Min. spacing from cooktop edge to nearest vertical combustible wall to the RIGHT: 8" Min. spacing from cooktop edge to nearest vertical combustible wall to the LEFT: 8" Min. spacing from cooktop edge to nearest vertical combustible wall to the REAR: 15/16" Minimum spacing to front edge of counter: 1 7/8" Minimum distance between cooktop and cabinet directly above: 30" Minimum width of cabinet directly above: 30" Maximum depth of cabinets directly above and adjacent: 13" Minimum distance between countertop and adjacent cabinet above: 18" • Additional Information • • Cabinetry over cooktop : 30" minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet. 24" minimum when bottom of wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or copper. • To eliminate the hazard of reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the hazard can be reduced by installing a range hood that projects horizontally a minimum of 5" beyond the bottom of the cabinets. • Countertop must be supported within 3" of cutout. • Radius corners of cutout and file to insure smooth edges and prevent corner cracking (1/4" radius). • Blower can be swiveled 90°. See page 2-3 for additional information 21" 18" 13 13/16" Minimum clearance required Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or outdated data sheets. Because of the difficulty or impracticability of deter- mining actual damages, liability of Dimension Express shall not exceed $50.00. Copyright © Dimension Express, 2002. 321 Provide 2" min. cabinet clearance to motor for cooling purpose. 6" recomended for servicing. Overall Dimensions Top View (not to scale) Cut-Out Dimensions Countertop View (not to scale) 29" 30" 30" Cabinet Requirements Wall View (not to scale) Minimum horizontal clearance between the edge of the appliance and combustible construction extending from the cooking surface to 18" above the cooking surface is 8" (see solid areas). Grease container 3 1/2" 13 3/4" 11 13/16" Front View of Cooktop and Attached Blower (not to scale) • NEVER reuse Data Sheets. Data Sheets are subject to change without notice. Dimension Express is a FREE service bureau and is updated daily, it makes far more sense to spend the time necessary to request new Data Sheets for each project, as opposed to the problems, time, costs, and risks associated with reusing old Data Sheets. • Call Dimension Express if you have any questions at (775) 833-3633 • • Always refer to a current Code at a Glance or manufacturer directory • • Data Sheet codes change on the first of odd numbered months at 12:01am • BN182.34 • A321B149C150 • • 032603 • 95657 • 67301