Jenn-Air JGRP548WP Use and Care - Page 27
Delay Start
![]() |
View all Jenn-Air JGRP548WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
WARNING Delay Start Delay with Probe: Food Poisoning Hazard Do not let food sit in oven more than one hour before or after cooking. Doing so can result in food poisoning or sickness. WARNING Delay Start allows the oven(s) to be set to turn on at a certain time of day and cook for a set length of time. Delay Start should not be used for food such as breads and cakes because they may not bake properly. Delay Start is available with any cycle that has a Delay Start button. To Set a Delay Start: 1. From any mode with the Delay Start button available, press DELAY START. 2. Set time of day you would like the oven to start heating by using the slider to enter a desired time or press the "-15min" or "+15min" buttons. These buttons decrease or increase the selected time and also move the slider. 3. Press SET DELAY. Delay with Cook Timer: 1. If Delay with Cook Timer is desired, select Timer Not Set or Cook Timer. 2. Program desired cook time, then touch DELAY START. The difference between the start and end time should equal the cook time. 3. (Optional) Select KEEP WARM ON to keep food warm after cooking if desired. 4. Use the slider to enter a desired begin and end time or press the "-15min" or "+15min" buttons. These buttons decrease or increase the selected begin/end time and also move the slider. 5. Press SET DELAY. Burn Hazard Use an oven mitt to remove temperature probe. Do not touch broil element. Failure to follow these instructions can result in burns. 1. If Delay is chosen when the probe is in use, select Delay Start when at the Probe Temp screen, then select when cooking should begin. Because the probe controls the end time, the end time will not be displayed. 2. Use the slider to enter a desired begin time or press the "-15min" or "+15min" buttons. These buttons decrease or increase the selected begin and also move the slider. 3. The oven will automatically keep the food warm when the probe reaches the target temperature. 4. Press SET DELAY. Delay for Clean 1. If Delay for Clean is desired, select Delay Start after selecting the Cleaning level. Select when cleaning should begin. The oven will calculate the end time based on your cleaning level choice. 2. Use the slider to enter a desired begin and end time or press the "-15min" or "+15min" buttons. These buttons decrease or increase the selected begin/end time and also move the slider. 3. The oven will cool for an additional hour after cleaning is completed. 4. Press SET DELAY. 27
![](/manual_guide/products/jennair-jgrp548wp-use-care-fc26b9c/27.png)