Jenn-Air JIC4730H Installation Instructions - Page 3

INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed ■■ Tape measure ■■ Phillips screwdriver ■■ Flat-blade screwdriver ■■ Marker or pencil ■■ Pliers Parts Supplied Check that all parts are included. ■■ Cooktop assembly ■■ (2) Hold-down brackets ■■ (2) 1" (2.5 cm) clamping screws ■■ Foam tape seal ■■ Foam strip Parts Needed ■■ (4) UL listed 22-6 AWG Twist on Connectors Check local codes. Check existing electrical supply. See the "Electrical Requirements" section. It is recommended that all electrical connections be made by a licensed, qualified electrical installer. IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate, or sustain other damage. This cooktop has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C). The model/serial/rating label is located on the bottom of the electrical junction box cover. Product Dimensions 24" (61.0 cm) Cooktop (Model JIC4724HB, JIC4724HS) Top View A B A. 21" (53.3 cm) B. 24" (61.0 cm) 30" (76.2 cm) Cooktop (Model JIC4730HB, JIC4730HS) Top View Location Requirements IMPORTANT: Observe all governing codes and ordinances. When installing cooktop, use minimum dimensions given. ■■ The cooktop must be a specified cooktop that is approved to be installed either alone or over an undercounter built-in oven. Check the cooktop base for an approved installation label. If you do not find this label, contact your dealer to confirm that your cooktop is approved. ■■ To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. ■■ The cooktop must be installed in a level countertop. ■■ Ovens approved for this type of installation will have an approval label located on the top of the oven. If you do not find this label, contact your dealer to confirm that your oven is approved. Refer to oven manufacturer's Installation Instructions for approval for built-in undercounter use and proper cutout dimensions. ■■ The cooktop should be installed away from strong draft areas, such as windows, doors, fans, or strong heating vents. The cooktop should be located for convenient use in the kitchen. ■■ Use the countertop opening dimensions that are given with these Installation Instructions. Given dimensions are minimum clearances and provide 0" (0 cm) clearance. ■■ Grounded electrical supply is required. See the "Electrical Requirements" section. B A. 21" (53.3 cm) B. 30" (76.2 cm) 36" (91.4 cm) Cooktop (Model JIC4736HS, JIC4736HB) Top View B A. 21" (53.3 cm) B. 36" (91.4 cm) A A 3