Jenn-Air JJD3024HL1 Installation Instructions 1 - Page 5

Clearance Dimensions - Flush Installation Warming Drawer Installed Below Oven Front View Side View E Cabinet Back A 1" (25 mm) Side Cleats* g ⁷⁄₈" (22 mm) B Platform* C Top View D E Side Cleat* F A Width of flush inset cutout (minimum) 2311/16" (60.2 cm) B Height of flush inset cutout (minimum) 233/4" (60.3 cm) C Bottom of cutout to floor (minimum) If installed under model JMC6224 5" (12.7 cm) If installed under any other model 31" (78.7 cm) D Width of opening (minimum) 215/8" (55.0 mm) for JJD3024HM E Depth of cutout (minimum) 227/16" (57.05 cm) for JJD3024HM 221/2" (57.13 cm) for JJD3024HL F Depth to Side Cleat 13/16" (20.5 mm) for JJD3024HM 27/32" (21.3 mm) for JJD3024HL g Recommended outlet location Flush Installation Requirements A 229/16" (57.3 cm) minimum cutout depth is required. These dimensions will result in a 1/8" (3 mm) reveal on all sides of the warming drawer. *The front face of the cleats and platforms will be visible and should be treated as a finished surface. 5