Jenn-Air JJD3024HL1 Installation Instructions 1 - Page 7
Complete Installation
View all Jenn-Air JJD3024HL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
7. Use the two 19 x 3.5 mm screws provided to secure the warming drawer frame to the cabinet. A A. Two 19 x 3.5 mm screws Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. For warming drawer use and cleaning, read the Use and Care Guide. 5. Push in and turn the control knob to 160°F (71°C) and push the red button. The light should illuminate. If warming drawer(s) does not operate, check the following: ■■ Household fuse is intact and tight, or circuit breaker has not tripped. ■■ Warming drawer is plugged into a grounded 3 prong outlet. If you need Assistance or Service: Please reference the "Troubleshooting" section of the Use and Care Guide. 7