Jenn-Air JJD3027IM Installation Instructions - Page 8

Install custom handle not supplied through custom drawer

Get Jenn-Air JJD3027IM PDF manuals and user guides View all Jenn-Air JJD3027IM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

3. It is recommended that if a wood or porous custom drawer front is installed, a high-quality spray polyurethane finish be applied to the inner wood surface. 4. For the lens, drill a 5/16" (7.9 mm) diameter hole through the appearance side of the custom drawer front. This hole will allow the "ON" Indicator Light to be visible through the custom drawer front. To secure the lens, use an adhesive specified for plastic-to-wood application. 5. Install custom handle (not supplied) through custom drawer front. 6. The custom drawer front is fastened to the stainless steel drawer by driving 6 screws through clearance holes in the drawer front into the wooden or other custom made panel. D A C B E D A. Optional handle B. Custom door panel C. Warming drawer front D. #8-18 x 3/4" (1.9 cm) screws (6) E. Lens

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
3.
It is recommended that if a wood or porous custom drawer
front is installed, a high-quality spray polyurethane finish be
applied to the inner wood surface.
4.
For the lens, drill a 5/16" (7.9 mm) diameter hole through
the appearance side of the custom drawer front. This hole
will allow the “ON” Indicator Light to be visible through the
custom drawer front. To secure the lens, use an adhesive
specified for plastic-to-wood application.
5.
Install custom handle (not supplied) through custom drawer
front.
6.
The custom drawer front is fastened to the stainless steel
drawer by driving 6 screws through clearance holes in the
drawer front into the wooden or other custom made panel.
A
D
D
C
B
E
A. Optional handle
B. Custom door panel
C. Warming drawer front
D. #8-18 x 3/4" (1.9 cm) screws (6)
E. Lens