Jenn-Air JS42PPDUDE Owners Manual 1 - Page 7
Turning Refrigerator On and Viewing Set Points - manual
View all Jenn-Air JS42PPDUDE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Turning Refrigerator On and Viewing Set Points ■■ Press the Cooling (ON/OFF) touch pad. Water Filter Indicator and Reset See "Water Filter Indicator" section. Max Cool NOTE: ■■ After the refrigerator is turned on, the Over Temperature audio alarm and indicator light may activate every 1¹⁄₂ hours until the refrigerator and freezer temperatures are below 48°F (9°C) and 15°F (-9°C), respectively, or until the alarm is turned off. To turn off the audio alarm and indicator light, see "Master Alarm Reset." ■■ The Cooling ON/OFF touch pad on the control panel shuts down refrigerator functions such as cooling, lighting, fans and compressors. To turn the power off completely, use the power ON/OFF switch located behind the top grille. See "Power On/ Off Switch." Viewing the Celsius Temperatures The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures. ■■ Press MAX COOL to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off. NOTE: The temperature display will remain at 34°F (1°C) and -5°F (-21°C) for the refrigerator and freezer compartments, respectively, while the Max Cool feature is enabled. After 24 hours, the refrigerator returns to the previous temperature set points. ■■ Press the F/C touch pad. To redisplay degrees Fahrenheit, press F/C again. NOTE: If the freezer temperature is below zero, the negative sign next to the freezer display will light up. This is normal. Adjusting Controls NOTE: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made. To Adjust Set Point Temperatures: ■■ Press the refrigerator or freezer PLUS (+) or MINUS (-) touch pad until the desired temperature is reached. Alarm Functions Master Alarm Reset Pressing Alarm Reset once will turn off the audio alarm and indicator light. The audio alarm will not sound again for the current condition that caused the alarm until a new condition occurs or until a Master Alarm Reset is performed. A Master Alarm Reset can be performed by pressing Cooling (ON/ OFF) twice or by turning the power to the refrigerator off and on again. See "Power On/Off Switch." After performing a Master Alarm Reset, the indicator light will reactivate if the condition that caused the alarm is still present. See "Over Temperature," "Call Service," or "Door Open." ■■ Press the Set To Recommended touch pad to reset the set points to the factory recommended temperatures. NOTE: The set point range for the freezer is -5°F to 3°F (-21°C to -16°C). The set point range for the refrigerator is 34°F to 42°F (1°C to 6°C). CONDITION/REASON: TEMPERATURE ADJUSTMENT: REFRIGERATOR too cold REFRIGERATOR Control Not set correctly for conditions 1° higher REFRIGERATOR too warm High use or room very warm REFRIGERATOR Control 1° lower FREEZER too cold FREEZER Control Not set correctly for conditions 1° higher FREEZER too warm/too little ice FREEZER Control High use or heavy ice use 1° lower Door Open The Door Open indicator light will flash, an alarm will sound and the interior lights will turn off when a door has been open for longer than 10 minutes. When the door is closed, the audio alarm will reset and turn off, but the Door Open indicator light will continue to flash until the temperature is equal to or below 45°F (7°C) and 15°F (-9°C) for the refrigerator and freezer compartments, respectively. NOTE: To deactivate the audio alarm and indicator light, see "Master Alarm Reset." Over Temperature IMPORTANT: If the Over Temperature Alarm activates, your food may spoil. See the "Power Interruptions." Minimize door openings until temperatures return to normal. The Over Temperature feature is designed to let you know when either the refrigerator temperature rises above 48°F (9°C) or the freezer temperature rises above 15°F (-9°C) for longer than 1¹⁄₂ hours. The audio alarm will shut off automatically when the temperature returns to normal, but the indicator light will continue to flash until the Alarm is pressed to let you know that an over temperature condition has occurred. 7