Jenn-Air JS42SEDUDW Use and Care - Page 6

Using the Controls Depending on your model, your refrigerator may have Style 1 or Style 2 controls. Follow the instructions specific to your model. Style 2 IMPORTANT: ■ Wait 24 hours after you turn on the refrigerator before you put food into it. If you add food before the refrigerator has cooled completely, your food may spoil. NOTE: Adjusting the refrigerator and freezer controls to a lower (colder) setting will not cool the compartments any faster. CONDITION/REASON: ■ If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls. ■ After the refrigerator is turned on, the Over Temperature audio alarm and indicator light may activate every 1¹⁄₂ hours until the refrigerator and freezer temperatures are below 48°F (9°C) and 15°F (-9°C), respectively, or until the alarm is turned off. To turn off the audio alarm and indicator light, see "Master Alarm Reset." REFRIGERATOR too cold Not set correctly for conditions REFRIGERATOR too warm High use or room very warm FREEZER too cold Not set correctly for conditions TEMPERATURE ADJUSTMENT: REFRIGERATOR Control 1° higher REFRIGERATOR Control 1° lower FREEZER Control 1° higher Turning Refrigerator On/Off and Viewing Set Points The On/Off touch pad on the control panel shuts down refrigerator functions such as cooling, some lighting, fans and compressors. To turn the power off completely, use the power On/Off switch located behind the top grille. See "Power On/Off Switch." ■ Press and hold the ON/OFF touch pad for 3 seconds. The LED will light up to indicate that cooling is Off. Press the touch pad again to turn on cooling. The LED will turn off. Viewing the Celsius Temperatures ■ Press F/C touch pad. To redisplay degrees Fahrenheit, press F/C again. NOTE: If the freezer temperature is below zero, the negative sign next to the freezer display will light up. This is normal. Adjusting Controls FREEZER too warm/too little ice High use or heavy ice use FREEZER Control 1° lower Alarm Functions Master Alarm Reset Pressing Alarm Reset once will turn off the audio alarm and indicator light. The audio alarm will not sound again for the current condition that caused the alarm until a new condition occurs or until a Master Alarm Reset is performed. A Master Alarm Reset can be performed by pressing ON/OFF twice or by turning the power to the refrigerator off and on again. See "Power On/Off Switch." After performing a Master Alarm Reset, the indicator light will reactivate if the condition that caused the alarm is still present. See "Over Temperature," "Call Service," or "Door Alarm." Style 1 IMPORTANT: ■ The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. NOTE: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made. ■ Press the SET TO RECOMMENDED touch pad to reset the set points to the factory recommended temperatures. NOTE: The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (2°C) for the refrigerator. ■ The actual temperature may differ from the display when a door is open for an extended period of time. To Adjust Set Point Temperatures: The set point range for the freezer is -5°F to 5°F (-21°C to -15°C). The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C). ■ Press the refrigerator or freezer PLUS (+) or MINUS (-) touch pad until the desired temperature is reached. Style1 Style 2 Door Alarm The Door Alarm indicator light will flash, an alarm will sound and the interior lights will turn off when a door has been open for longer than 10 minutes. When the door is closed, the audio alarm will reset and turn off, but the Door Open indicator light will continue to flash until the temperature is equal to or below 45°F (7°C) and 15°F (-9°C) for the refrigerator and freezer compartments, respectively. NOTE: To deactivate the audio alarm and indicator light, see "Master Alarm Reset." Over Temperature IMPORTANT: If the Over Temperature Alarm activates, your food may spoil. See the "Power Interruptions." Minimize door openings until temperatures return to normal. The Over Temperature feature is designed to let you know when either the refrigerator temperature rises above 48°F (9°C) or the freezer temperature rises above 15°F (-9°C) for longer than 1¹⁄₂ hours. The audio alarm will shut off automatically when the temperature returns to normal, but the indicator light will continue to flash until the Alarm is pressed to let you know that an over temperature condition has occurred. 6