Jenn-Air JWD3027EX Dimension Guide - Page 3

JENN-AIR® DETAILED PLANNING DIMENSIONS 30"/27" WARMING DRAWERS JWD3030E - 293⁄4" x 101⁄4" x 261⁄4" JWD3027E - 263⁄4" x 101⁄4" x 261⁄4" 3 of 4 OPENING/CLEARANCE DIMENSIONS A MODEL # JWD3030E JWD3027E in cm in cm A Width of cabinet (min.) 30 76.2 27 68.6 B Width of cutout 281⁄2 72.4 251⁄2 64.8 C Height between cutouts (min.) 21⁄2 6.4 21⁄2 6.4 D Height of cutout 91⁄8 23.2 91⁄8 23.2 Bottom of cutout to floor (recommended) 41⁄4 10.8 41⁄4 10.8 E Bottom of cutout to floor (min.) 1 2.5 1 2.5 F Depth of cutout (min.) 24 61.0 24 61.0 e Recommended outlet location ELECTRICAL REQUIREMENTS 120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required. A dedicated circuit is recommended. If the outlet is on the rear wall behind the warming drawer, it must be recessed and located in the upper right-hand corner. If outlet is located in an adjacent cabinet, drill a 13⁄8" (3.5 cm) minimum diameter hole in the side wall or support surface to access the pBoawckeor fsCuapbpinlyetcord. C LOCATION REQUIREMENTS e Support surface must be solid, level and flush with the bottom of the cabinet cutout. The B D warming drawer must be leveled before completing installation. C F e D E FRONT VIEW SIDE BVIEW A F Back of Cabinet C Power Cord Location BACK VIEW IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All Jenn-Air® appliances are appropriately UL, CUL or CSA approved. 8689AdZw1216