CD6112
8
TUNER OPERATION
The CD6112 allows you to receive channels in U.S.A. or EUROPE mode.
See “Frequency Spacing” on page 7 to learn how to change the tuner
options.
Select a Band
Press
BAND
(3) to change between three FM bands and two AM bands.
Each band stores up to six preset stations.
Mono/Stereo Selection
Press and hold
the
DX/ST
button (15) to switch between monaural and
stereo reception. Choose mono when a strong stereo signal cannot be
achieved (stereo mode is indicated by the
icon). “MONO” or “STEREO”
temporarily appears on the screen when selected.
Local/Distant Reception
When the Local function is on, only radio stations with a strong radio signal
are played. Activate the Local (LOC) function by pressing the
DX/ST
button
(15). Press
DX/ST
again to activate the Distant (DX) mode (indicated by the
triangle with rings above it).
Tuning
Manual Tuning
Press the
UP TUNING >>|
or
DOWN TUNING |<<
buttons (17) for more
than three seconds to enter manual tuning mode, then press the Up Tuning
or Down Tuning buttons to move the radio frequency number up or down
one step.
Auto Seek Tuning
Press the
UP TUNING >>|
or
DOWN TUNING |<<
buttons (17) for less than
three seconds to move to the next/previous station automatically.
Preset Stations
Up to six stations on each band can be stored as presets and can then be
instantly recalled by pressing the associated preset button (12). To store a
station, turn the radio on and select the desired band and station. Press and
hold the desired preset button (numbered one through six on the face of the
radio) for more than two seconds. When stored, the preset number will
appear in the display. The station is now stored and can be re-called at any
time by pressing the corresponding preset button. Repeat for the remaining
five presets on the current band and for all presets on the other four bands.
Preview Scan / Automatically Store (PS/AS)
Preview Scan
Press
PS/AS
(13) to scan all strong stations in the current band. The unit
will stop at each station for five seconds before continuing to the next
station. Press
PS/AS
again to stop scanning and listen to the current
station.
Automatically Store
Select six strong stations and store them in the current band using the
Automatic Store feature. To enable this feature,
press and hold
PS/AS
(13)
for more than two seconds. The radio will automatically scan the band in
use and enter strong stations into the preset memory positions for that
band. After entering the stations into memory, the unit will automatically
stop at each station for five seconds so each can be heard. When using the
Automatically Store feature, the new stations replace any stations already
stored in preset memory for the selected band.
CD6112
DX/ST
LOUD
PS/AS
/
160
Watts
1
7
8
9
10
11
12
13
14
15
16
17
