Jensen CDX6311 Instruction Manual - Page 13

CDX6311 TUNER OPERATION The CDX6311 comes equipped with a World Tuner, allowing you to receive channels in USA, EUROPE, LATIN, & OIRT (Russia). See "Frequency Spacing" on page 7 to learn how to change the World Tuner options. Select a Band Press BAND (19) to change between three FM bands and two AM bands. Each band stores up to six preset stations. Tuning Manual Tuning Press the UP TUNING (10) or DOWN TUNING (11) button for more than three seconds to enter manual tuning mode, then press the UP TUNING or DOWN TUNING buttons to move the radio frequency number up or down one step. Auto Seek Tuning Press the UP TUNING (10) or DOWN TUNING (11) button for less than three seconds to move to next station automatically. Scan Press SCAN (20) to scan through strong stations in the current band. The radio pauses for five seconds at each strong station. Press SCAN again to listen to the current station. Preset Stations Six numbered preset buttons store and recall stations for each band. Store a Station Select a band (if needed), then select a station. Hold a preset button (12-17) for three seconds. The preset number will appear in the display. Automatically Store / Preset Scan Automatically Store Automatically select six strong stations and store them in the current band. Select a band (if needed). Press AS/PS (21) for more than three seconds. The new stations replace any stations already stored in that band. Preset Scan Scan stations stored in the current band. Select a band (if needed). Press AS/PS (21) for less than three seconds. The unit will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. Stereo The unit will automatically pick up a stereo signal, when available. When in stereo mode, the "ST" icon (18) appears in the display. When no stereo signal is available, the unit will automatically revert to mono operation, and no icon will be displayed. Recall a Station Select a band (if needed). Press a preset button (12-17) to select the corresponding stored station. 9