Jensen CDX6311 Instruction Manual - Page 16
Cd Changer Operation, Jport Operation - owners manual
UPC - 043258302694
View all Jensen CDX6311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CD CHANGER OPERATION Please call Jensen technical support at 1-800-323-4815 for a complete list of CD changers compatible with this unit. The following Jensen CD Changers are compatible with this unit: JCH10RF and CH1001. After the CD changer has been installed and properly connected, press the Reset button to initialize the installation. Refer to the owner's manual included with the CD changer for instructions on installing, loading and using the CD magazine. CD Changer Mode Press MODE (2) during radio or disc play to select operation of the CD changer. "CDC" will appear in the display. Disc play will begin, and the disc and track numbers will be shown in the display. If a new magazine has been loaded into the changer, play will begin from the first track of the first disc. If a magazine was already in the changer, play will resume where it ended. Disc Select (UP/DN) To select a disc for play, use the UP (17) button to advance to a higher disc or the DN (16) button to move back to a lower disc. The number of the disc in play appears on the display. Other Features The Play/Pause, Scan, Repeat, Shuffle, Track Select and Fast Forward/Fast Reverse features for CD changer play are accessed in the same methods as for regular disc play. Refer to the CD Player Operation section of this manual for details. CDX6311 CD Changer Error Codes If problems arise during CD changer operation, the following error codes may appear in the display: ER-1: No magazine loaded in the CD changer. ER-3: Error in the disc loading function. ER-5: Error in the magazine position. ER-7: Error in the laser focus on the disc. ER-2: Problem in the disc loading function. ER-4: Error in the disc unloading function. ER-6: Error in the laser pickup position. To resolve any of the above problems, eject the magazine from the changer and verify that the discs are clean, undamaged and loaded correctly. Pressing the reset button may help, but will erase the time and preset memories. If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance. JPORT OPERATION After the JPORT has been installed and connected, press the RESET button to initialize the installation. The JPORT can be used to control your iPod or an optional CD Changer. Refer to the owner's manual included with the JPORT for instructions regarding the operation of external devices attached to your JPORT. 12