Jensen JHD1510 Operation Manual - Page 7

JHD1510 BASIC OPERATION 13 20 18 19 NOTE: IPOD and Sirius (SAT) mode will be skipped if the module is not installed. 3 1 16 14 21 17 4 15 11 8 6 5 7 9 10 2 12 Power On/Off Press the rotary encoder POWER button (1) to turn the unit on or off. The unit will resume at the last mode selected (Tuner, Aux, etc.). POWER Volume Control To increase the volume, turn the rotary encoder (1) to the right. To decrease the volume, turn the rotary encoder to the left. While adjusting the volume, the LCD displays a bar graph and numerical representation of the level. The maximum volume setting is 40. Mute Press the MUTE button (16) to mute the audio output. Press MUTE again to restore the audio output to the previous level. Mode Press the MODE button (4) to select a different mode of operation, as indicated on the display panel. Available modes include Tuner (AM/FM), SAT (Sirius) radio, iPod and AUX in (optional Auxiliary Input). NOTE: Sirius (SAT) mode will be skipped when the Region menu option is set to "EURO". Reset The reset button should be activated for the following reasons: • initial installation of the unit when all wiring is completed • function buttons do not operate • error symbol on the display Use a ball point pen or thin metal object to press the RESET button (21). This may be necessary should the unit display an error code. Audio Menu Press the AUDIO MENU button (3) to access the audio menu. You can navigate through the audio menu items by pressing the AUDIO MENU button repeatedly. Once the desired menu item appears on the display, adjust that option by turning the rotary encoder (1) within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity. The following menu items can be adjusted. Bass Level Use the rotary encoder (1) to adjust the Bass level range from "-6" to "+6". Treble Level Use the rotary encoder (1) to adjust the Treble level range from "-6" to "+6". Balance Use the rotary encoder (1) to adjust the Balance between the left and right speakers from "12L" (full left) to "12R" (full right). Fader Use the rotary encoder (1) to adjust the Fader between the rear and front speakers from "12R" (full rear) to "12F" (full front). 5