Jensen JHD2000 Owners Manual - Page 2

Content Operating Instruction 2-6 Setting the Clock 7 Care and Maintenance 7 AM and FM Reception In a Mobile Environmen....8 Some Facts About AM and FM Reception 8 FM Reception While You Are Driving 9 Specifications 10 Warranty 11 Wiring Diagram 12 - 1 - OPERATING INSTRUCTIONS 3 4 5 6 7 8 20 TUNE TRK JHD2000 9 TUNE TRK PUSH ON VOL LOUD AUD 13 16 10 19 18 17 22 23 15 HEAVY-DUTY AUTOREVERSE ST BAND WB MODE 11 SCAN AS/PS TF 1 2 3 4 5 6 12 21 12 14 . POWER ON-OFF/VOLUME CONTROL(PUSH ON/VOL) Press and release this button to turn the unit on or off. When on, rotate the control clockwise to increase the volume level. If the ignition switch is on, the radio will also automatically turn on when a cassette tape is inserted. . VOLUME CONTROL(VOL) To increase the volume level, rotate the vol control clockwise. Vol : will appear and the volume level will be shown on the display panel from a minimum of vol:0 to a maximum of vol:40. To decrease the volume level, rotate the vol control counter clockwise. The display will automatically return to the normal indication 5 seconds after the last volume adjustment or when another function is activated. This control is also used in conjunction with the AUD button (3) to adjust the bass, treble, balance and fader levels as described in,,and. .AUD CONTROL BUTTON This button is used to select the audio funtion(bass,treble,balance,fader or volume). Pressing the AUD button accesses the desired function,whose setting is adjusted using the VOL control.Pressing the button will first display the bass adjustment (BAS:on the display panel),then treble adjustment (TRE: will appear on the display), balance (BAL:),fader(FAD:) and then volume (VOL:).The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated. . BASS CONTROL Select the Bass mode by pressing the AUD button so the BASS:indication - 2 -